RUBBER TIMING BELTS & V-BELTS
For rubber timing belts and narrow section V belts, we are the distributor of Continental ContiTech products, one of the leading company in the world. We are serving our customers with comprehensive product range, strong stock and accumulation of knowledge.
CONTI-V STANDARD ULTRAFEX
It is designed to provide more power transmission than conventional V-belts do.
CONTI-V FO ADVANCE
XPZ, XPB, XPB, XPC
These are serrated narrow section belts with high power transmission capacity.
The serrated structure in its cross-section helps the return in small pulleys, prevents heat by air circulation and extends the life of the belt.
3V(9J), 5V(15C), 8V (25J), A/HA, B/HB, C/HC
It is used in systems, where variable loads are observed and pulses are more effective.
It generates an ultimate solution in applications where single belts turn upside down, tremble and move off the pulleys.
13/6, 17/6, 21/6, 22/8, 24/8, 26/8, 28/8, 30/10, 32/10, 37/10, 42/12, 47/12, 52/16, 65/20, 70/18)
It is used in high speed systems. It has been mainly designed for variator drives.
PJ, PL, PM
It grants cost-effective solutions suitable for high drive conditions with high belt speeds and small pulley diameters and reverse-tensioning idlers.
HTD 3M, HTD 5M, HTD 8M, HTD 14M, MXL, XL, L, H, XH, XHH, STD 5M
These are economical products generally used in industrial enterprises. It is favored in applications requiring low and medium performance.
CONTI SYNCHROFORCE CXA
HTD 8M, HTD 14M, STD 8M, CTD 8M
It is preferred in applications requiring high torque levels at an average temperature between -20°C and +100°C.
CONTI SYNCHROFORCE CXP
HTD 3M, HTD 5M, HTD 8M, HTD 14M, STD8M
It is preferred in applications requiring high circuits at an average temperature between -20°C and +100°C.
CONTI SYNCHROFORCE EXTREME
HTD8M, HTD14M, STD8M, CTD8M, CTD14M
It has been mainly designed for applications requiring high circuits and torque at an temperature between -30°C and +130°C.
It is specially manufactured to be resistant to the severe chemical conditions in paint shops.
HTD 5M, HTD 8M
They are used as open-ended rubber timing belts for use in automatic door entry systems.
CTD8M, CTD 14M
With its advanced CTD teeth structure and particular material structure, it provides reliable power transmission at high tension and torque.
The body structure consists of a unique polyurethane compound and is immune to wear and chemical reactions.
It is the only belt series that can be an alternative to chain drives with its high performance and flexible structure.